PSAND is naturally occuring aggregate that is highly granular that has fine rock and mineral particles. It provides the structure in most of plaster constructions and the quality of PSAND can make a huge difference in the outcome of the construction.
A high quality plaster must be sharp with a high diversity in particle sizes and must be super clean. The importance of cleanliness of PSAND cannot be overrated. Bucket type sand washers can improve the sand quality by washing out any tiny, unnecessary stone powders and other impurities mixed in the sand that is obtained from natural sources or from sand makers like sand cone or VSI.
We at PS Blue Metals adopt a strict quality standards when it comes to PSAND and we do it through the utilization of state of the art machinery. Our PSAND meet highest IS standard requirements of gradation in the final output.
The output of our sand washers has high-washing quality, reasonable heaviness with large output capacity, not to mention lower energy consumption with very little loss of sand during this washing process.
PSand is usually manufactured from “GRIT”, which essentially is defined as any aggregate that is below 6mm and that is a byproduct of a stone crusher. The sand plant is is specially designed to manufacture PSAND from the grit. That is then sieved and serrated through metal plates.
The Dust Free Plastering Sand is the ones that has a surface area of micro fine dust which is approximately 400 Sq Ft per 1Kg of dust in its area. The greater the surface area, the more it can hold water to cement ratio.
Our PSAND is tested multiple times during the day batch-wise so the quality is homogenous over long period of time. This ensures that our product has superior quality than our competitors, not to mention the fact that, our PSAND per Metric Ton costs less than the market, simply because we use state of the art manufacturing processes and the delivery mechanisms are software driven so that the supply chain management is smooth and highly cost effective to the consumers.
PSAND must be hard, durable, clean and free from organic substances, clay, silt and dust. The sand must not have any harmful impurities such as iron, alkali earth metals, salt, coal, mica shale or any other materials, shell, or for that matter any other impurities that can be detrimental to the hardening processes or poor appearance of the paster or can eventually corrode the structure or to be corrosive to metal lathing etc.,